Quick Take
When you need industrial PCs for SCADA and edge control, your first decision is whether you need a complete system or a component. The four listed options span a wide price range: the Asus Ascent GX10 at USD 3,899.99 is a full AI desktop with ARM Cortex X925, 128 GB RAM, and 1 TB storage; the NCD.io PR55-36 at USD 375.00 is an industrial IoT edge computer with XBee 900MHz, WiFi, and LTE SIM slot; the Dell Windows 11 mini desktop at USD 282.00 pairs a compact frame, 32 GB RAM, and 1 TB SSD with built-in WiFi; and the Toradex Colibri PXA310 at USD 14.72 is a used embedded COM module from decommissioned industrial automation equipment.
Listed Price Comparison
| Product | Listed Price | Relative Price Bar |
|---|---|---|
| Asus Ascent GX10-GG0010BN Desktop AI Computer | USD 3,899.99 | |
| NCD.io PR55-36_9HP Industrial IoT Edge Computer | USD 375.00 | |
| Dell Windows 11 Mini Desktop | USD 282.00 | |
| Toradex Colibri PXA310 624MHz ARM SOM Embedded COM Module | USD 14.72 |
Decision Matrix
| Product | Best For | Key Listed Attributes | Consideration |
|---|---|---|---|
| Asus Ascent GX10 | Local AI processing at the edge | New, wireless connectivity, ARM Cortex X925, 128 GB RAM, 1 TB storage, Computrace unlocked | Highest listed price |
| NCD.io PR55-36 | Wireless industrial IoT edge computing | New - Open box, XBee 900MHz radio, WiFi, LTE SIM slot, Ethernet, OLED, USB ports | Open-box condition, may need software setup |
| Dell Windows 11 Mini Desktop | Compact Windows-based SCADA client or edge workstation | Used, built-in WiFi, USB 3.0, DisplayPort, HDMI, Ethernet, 32 GB RAM, 1 TB SSD | Used condition may show minor cosmetic wear |
| Toradex Colibri PXA310 | Embedded module development and legacy replacement | Used, ARM-based COM module, Taiwan origin, WinCE V1.3C | Module only, no carrier board or peripherals |
Product Notes
Asus Ascent GX10-GG0010BN Desktop AI Computer
The Asus Ascent GX10 is the full-system route if you want edge control with serious compute headroom. It is listed as new, with an ARM Cortex X925 processor, 128 GB RAM, and 1 TB storage. The listing also notes that biases are unlocked, Computrace is unlocked, and MDM is not enabled, which can matter for organizations that want a clean, manageable Windows device. At USD 3,899.99, it is the most expensive item in this group and the only one positioned as an AI computer. The trade-off is clear: you are paying for a complete, high-spec machine rather than a modular or low-cost entry point.
Toradex Colibri PXA310 624MHz ARM SOM Embedded COM Module
If you are integrating a computer-on-module into your own carrier board, the Toradex Colibri PXA310 is the component-level answer. It is a used ARM-based module previously installed in industrial automation equipment and is listed as grade B, inspected, tested, and fully functional. The price, USD 14.72, is the lowest in this comparison, reflecting the fact that you receive only the module itself. The listing notes normal cosmetic wear from previous use and that no carrier board or peripherals are included. This makes it a fit for engineers working with Toradex Colibri architecture who need a legacy or replacement module rather than a ready-to-run PC.
NCD.io PR55-36_9HP Industrial IoT Edge Computer
The NCD.io PR55-36 is a purpose-built IoT edge computer for wireless industrial connectivity. Listed as new and never deployed in production, it remains in open-box condition and includes a power adapter and both antennas. Its mix of Digi XBee PRO S3B 900MHz radio, WiFi, LTE SIM slot, Ethernet, OLED display, and USB ports makes it practical for remote monitoring or SCADA-linked data collection. At USD 375.00, it sits well below the Asus system. Be aware that the listing says it might need to be reinstalled with basic software and suggests a factory reset before use, since some testing was done.
Dell Windows 11 Mini Desktop
For a more conventional PC experience in a small chassis, the Dell Windows 11 Mini Desktop is listed at USD 282.00 with 32 GB RAM, a 1 TB SSD, and built-in WiFi. The listing describes it as fully tested and working, clean and ready to use, and notes it may show minor cosmetic wear from normal use. It includes a power cord, a WiFi adapter, and HDMI and VGA adapters in the package. While this is a used unit without the industrial-specific wireless radios of the NCD.io or the AI-scale memory of the Asus, it is an approachable option for a Windows-based SCADA client, remote work machine, or light edge workstation.
Recommendation by Use Case
- For local AI workloads at the edge, the Asus Ascent GX10 is the only listed system with AI-oriented hardware, but it comes with the highest listed price.
- For a wireless industrial IoT gateway, the NCD.io PR55-36 offers the most integrated radio and LTE options at a mid-range price.
- For a compact Windows desktop in a control room or edge cabinet, the Dell mini desktop provides a familiar OS and solid RAM/storage.
- For electronics engineers working on embedded COM module projects, the Toradex Colibri is the low-cost, module-only starting point.
Pick the Asus when you need maximum on-device compute, the NCD when wireless IoT edge control is the job, the Dell when you want a Windows desktop that can handle SCADA client duties, and the Toradex when you are building or repairing at the module level.
