The hard part about choosing industrial connectors and control cable is that the right answer depends on the side of the connection and the length of the run. Do you need one quick waterproof interface, a six-contact receptacle, a batch of matching three-pin pairs, or a long continuous cable roll? These four listings cover all of those jobs.
Quick take
If your job needs just one compact power or signal connection, the CNLINKO female plug is the low-priced single piece. If you want a six-contact receptacle, the Lapp Epic sits in the middle. If you are building or repairing several identical connections, the CNLINKO LP-16 kit gives you multiple matching pairs. If you are pulling control cable over a long distance, the Belden roll covers the run.
Listed price comparison
| Product | Listed price | Price bar | What it is |
|---|---|---|---|
| CNLINKO 4 Pin Power Industrial Connector Female Plug Waterproof IP67 Signal M20 | USD 13.62 | waterproof female plug | |
| Lapp Epic 10.1710 6-Contact Screw Terminated Industrial Connector Receptacle | USD 50.00 | receptacle with copper contacts | |
| CNLINKO LP-16 3-Pin Industrial Connector Kit - 10 Complete Sets - New | USD 120.00 | circular connector kit with mating pairs | |
| Belden 2AS-1801POS-B-B/R Industrial Control Cable 1120A 01010000 ROLL OF 482FT | USD 641.24 | industrial control cable roll |
Decision matrix
| Use case | Pick | What it adds | Trade-off |
|---|---|---|---|
| Single compact connection | CNLINKO Power Industrial Connector Female Plug | waterproof female plug with 20A rating | female plug only; matching socket has a separate model number |
| More lines than a small plug | Lapp Epic 10.1710 Industrial Connector Receptacle | receptacle with copper contacts | single receptacle, not a complete pair |
| Several matching connections | CNLINKO LP-16 Industrial Connector Kit | multiple connector sets in one kit | higher cost than single connectors |
| Long cable run | Belden 2AS-1801POS-B-B/R Industrial Control Cable | continuous control cable roll | new open box; full-roll commitment |
Product notes
CNLINKO LP-16 Industrial Connector Kit
The LP-16 kit is the batch-connection option. It supplies complete mating pairs in one kit, with plastic plug housings and metal sockets. The circular connector style and IP67 rating fit lighting, audio/visual equipment, and industrial power applications. Reverse keying helps you keep one set of connections from plugging into another. If you need to wire several identical connections at once, this kit covers the whole job. The trade-off is cost: it is the higher-priced connector option here, so it only makes sense when you actually need multiple pairs rather than a single connection.
CNLINKO 4-Pin Power Female Plug
The CNLINKO female plug is the compact single-connection pick. It has an IP67 waterproof rating, a bayonet-style coupling, and a 20A current rating. The listing shows a 14-12 AWG wire range and gold-plated contacts, details worth matching to your conductors. If you need one small power or signal connection, this is the lowest-cost route. The trade-off is that the listing is for the female side only; the matching socket is referenced separately, so if your setup needs both halves, include that socket model.
Lapp Epic 10.1710 Industrial Connector Receptacle
The Lapp Epic receptacle gives you a screw-terminated industrial connector with copper contacts, which makes it a solid middle option when you need more wires than a compact plug can carry. The trade-off is that the listing is for the receptacle alone, not a full connector pair. If the matching plug is already in your parts bin, this receptacle slots into that scheme. If you need a ready-to-mate pair from a single listing, one of the connector kits in this group is a better fit.
Belden 2AS-1801POS-B-B/R Industrial Control Cable
The Belden roll is the long-run option. It is listed as a roll of 18AWG industrial control cable, described as 600V TC, 150V NPLF, and 90C dry/wet. If you need a full pull from one location to another, this roll provides the distance in one piece. The condition is listed as new open box, which is a useful detail for a cable purchase. The trade-off is the cost: this is the highest-priced listing in the group, so it fits when your project actually calls for a long cable run. For short jumpers, a connector-based approach will be easier on cost.
Final recommendation by use case
- Choose the CNLINKO female plug when you want one compact, waterproof connection.
- Choose the Lapp Epic when you need a receptacle that handles more lines than a small plug.
- Choose the CNLINKO LP-16 kit when you need several matching connections from one purchase.
- Choose the Belden roll when the job is a long, continuous cable run.
