Choosing a motor-control drive starts with a non-negotiable question: does the incoming power and motor requirement match the drive? These four VFD options span 220V and 400/480V setups, capacities from 1HP to 10HP, and different phase arrangements. A drive that fits the price target but not the electrical target is not the right pick.
Quick take
Start with voltage, phase arrangement, and motor capacity, then use the model number or control method to narrow the field. The listed prices run from $32.99 to $259.99, but the four drives are aimed at notably different requirements. The ABB ACS355-03U-02A4-4 is the model-specific 400/480V, 1HP choice. Uimoso occupies the 3KW and 4HP position, while the marddpair CNC VFD is listed at 7.5KW and 10HP. The maker T13-750W-H is the 750W and 1HP option for single-phase input and three-phase output.
Listed price comparison
| Drive | Listed price | Price bar |
|---|---|---|
| ABB ACS355-03U-02A4-4 Drive | USD 259.99 | |
| Uimoso H100-3S2-1B VFD | USD 92.99 | |
| marddpair AMZ1095683 CNC VFD | USD 119.39 | |
| maker T13-750W-H VFD | USD 32.99 |
Decision matrix
- A specific existing-drive reference: Choose the ABB ACS355-03U-02A4-4 Drive when that model identifier is central to the replacement requirement.
- One- or three-phase input with three-phase output: Choose the Uimoso H100-3S2-1B VFD for the stated 220V conversion configuration.
- SPWM control mode: Choose the marddpair AMZ1095683 CNC VFD when that listed control mode is part of the selection criteria.
- V/F control mode: Choose the maker T13-750W-H VFD when the stated V/F approach fits the intended motor-control setup.
Product notes
ABB ACS355-03U-02A4-4 Drive
The ABB ACS355-03U-02A4-4 Drive makes sense when the ACS355-03U-02A4-4 identifier is the requirement. Its stated 400/480V three-phase electrical basis and 0.75KW / 1HP capacity give it a distinct role beside the 220V-input choices. That is the concrete reason to select this drive: it addresses a named 1HP application on a 400/480V system rather than a broad capacity search. Its limitation follows from the same specifications. A project based on 220V input, or one requiring more than 1HP, points toward another option in this comparison.
Uimoso H100-3S2-1B VFD
The Uimoso H100-3S2-1B VFD is centered on a 3KW and 4HP target at 220V. It is a practical candidate when that capacity is the intended match and the title's inverter-converter format suits the task. The stated input-current range of 0-14A provides another electrical figure associated with this model. Scale is its clearest boundary: its 4HP rating is below the 10HP named in the marddpair CNC VFD title. Select the Uimoso drive for the 4HP application, rather than stretching it toward the larger capacity role.
marddpair AMZ1095683 CNC VFD
The marddpair AMZ1095683 CNC VFD is the capacity-led choice here, with 7.5KW and 10HP stated in its title. Its description also names a frequency control range of 0.1 to 2500.0Hz and direct-button frequency setting, giving the model a more detailed control-oriented profile. The listed maximum is 40A for each phase, which is an important defined boundary for the drive. Its input voltage is 220V, so it is not the match for the 400/480V three-phase application described by the ABB ACS355-03U-02A4-4 Drive.
maker T13-750W-H VFD
The maker T13-750W-H VFD concentrates on a 750W, 1HP motor-control role. The stated arrangement is single-phase AC 220V input with three-phase AC 220V output, making its intended electrical direction clear. Its listed maximum input current is 3.86A. This is the pick for a 1HP requirement that matches those 220V figures, rather than the higher-capacity Uimoso or marddpair choices. The key limitation is explicit: when using 110V input, the output is compatible only with 110V three-phase motors. That condition separates the 110V case from the 220V setup.
Final recommendation by use case
- For a 400/480V three-phase, 1HP requirement tied to the ACS355 model identifier, choose the ABB ACS355-03U-02A4-4 Drive.
- For a 220V, 3KW and 4HP application, choose the Uimoso H100-3S2-1B VFD.
- For the listed 7.5KW and 10HP capacity, choose the marddpair AMZ1095683 CNC VFD.
- For a 750W and 1HP single-to-three-phase 220V arrangement, choose the maker T13-750W-H VFD.
