Choosing a VFD usually comes down to how much risk you want to take on the hardware. On one side is a used Yaskawa V1000 at $40.00; on the other is a brand-new CNC 1 To 3 Phase 220V variable frequency drive at $118.92. Both belong in the VFDs and soft starters motor controls space, but they're very different starting points. This head-to-head looks at which one makes sense for a specific V1000 replacement, a new motor setup, or a budget-conscious project.
Quick verdict
Go with the Yaskawa CIMR-VA2A0001BAA V1000 when you want a particular V1000 part and are willing to accept used condition. Go with the CNC 1 To 3 Phase 220V Variable Frequency Drive Inverter VFD VSD 7.5KW 10HP when you need a new unit with more horsepower and flexible 220V input wiring.
At a glance
| Product | Listed Price | Price Indicator | Condition | Notable Specs |
|---|---|---|---|---|
| Yaskawa CIMR-VA2A0001BAA V1000 | $40.00 | Used | V1000 model, MPN CIMR-VA2A0001BAA | |
| CNC 1 To 3 Phase 220V VFD 7.5KW 10HP | $118.92 | New | SPWM control, 1 or 3 phase 220V input, 20A max per phase |
Where each product wins
- Yaskawa CIMR-VA2A0001BAA: Wins when you already know you need a V1000 drive. The model and MPN make it a precise part to target, and the used condition is the trade-off.
- CNC 1 To 3 Phase 220V VFD: Wins for larger motor loads and new installations. The generous capacity, flexible input options, and new condition give it more room to handle pumps, fans, and compressors.
Product notes
Yaskawa CIMR-VA2A0001BAA V1000 Variable Frequency Drive
If you're replacing a V1000 or building a panel around one, this drive is a useful find. It's a used unit, clearly identified as the V1000 model with the MPN CIMR-VA2A0001BAA, so you know exactly which drive you're looking at. That kind of specificity matters when you need a matching unit for an existing installation. The trade-off is the used condition: you're getting a pre-owned drive rather than a brand-new box, so the physical state is something to weigh before you commit. For someone who prioritizes a specific Yaskawa part over a different new inverter, this is the more direct route.
CNC 1 To 3 Phase 220V Variable Frequency Drive Inverter VFD VSD 7.5KW 10HP
This is the new, higher-output option in the pairing. It uses SPWM control and is rated for 7.5KW 10HP, with a maximum of 20A per phase, so it's built for bigger loads. The input side accepts 1-phase or 3-phase 220V, which adds flexibility if your shop has single-phase service but the motor is three-phase. The terminal block is described as rich with digital and analog control options, giving you more wiring freedom for external speed controls. The main limitation is that the product is identified by a general MPN (662506) rather than a model family name, so cross-referencing against documentation isn't as straightforward as it is with a V1000.
Final choice by use case
Pick the Yaskawa CIMR-VA2A0001BAA V1000 when you have a V1000-specific need and you're comfortable buying used. It's the practical choice for a replacement or a project that already revolves around that drive. Pick the CNC 1 To 3 Phase 220V Variable Frequency Drive Inverter VFD VSD 7.5KW 10HP when you're starting fresh with a larger motor and want new hardware. It's the safer, more capable choice for a new install.
