Browse by everyday use case, then check fit, tradeoffs, and details worth confirming before you open a seller page.
Compare a new Allen-Bradley 1756-EN2T communication module, two used Cisco IE-3000-8TC switches, and a 24-port Vevor module priced from $39.99 to $930 to find the right fit for your industrial network.
Need industrial networking fieldbus equipment? This comparison walks through three Ethernet switches and a WiFi serial server, with listed prices, decision guidance, and use-case picks from DIN-rail panels to serial-equipment conversion.
Four used Cisco industrial networking fieldbus switches from $54.99 to $3,400: see which one fits your port, feature, and budget needs.
Choosing an industrial networking fieldbus switch comes down to budget, port count, and new-versus-used condition. Compare the MOXA EDS-316, N-TRON 708TX, and two DIN-Rail Gigabit switches to find the right fit for your control panel.
This $39.99 industrial switch brings eight Gigabit ports, two SFP slots, and a 20Gbps switching capacity in a DIN-rail mountable housing with wide temperature tolerance. It suits compact control panels and outdoor nodes, though you'll need to plan around the fixed 10-port design.
A used N-TRON 708TX Industrial Ethernet Switch at $34.99 gives you an industrial Ethernet switch aimed at PLC and HMI communication. This review covers who should pick it and whether pre-owned hardware makes sense for your fieldbus network.
A practical look at the Industrial 6P Ethernet Switch with DIN-rail mounting and an SFP port, covering who it suits, what its 12Gbps capacity really means, and whether it belongs in your industrial networking fieldbus setup.
A used Grade B Cisco IE-3000-8TC managed industrial switch can handle harsh environments with dual DC power, a console port, and an alarm relay, but it ships without accessories and may show cosmetic wear. Here's what to weigh at $250.
A new Allen-Bradley 1756-EN2T network communication module costs USD 930.00. It suits buyers who need a specific industrial networking fieldbus part and want a new unit with a clearly identified model number. The main trade-off is price.
The USR-W610 serial server bridges RS232/RS485 devices to WiFi or Ethernet with transparent bidirectional transmission, TCP/UDP/HTTP modes, and AP/STA flexibility for $79.49. Discover whether it fits your industrial networking setup.
A used Datalogic FBC9080-N100 fieldbus converter and PROFINET gateway at $99.99. This review covers who it suits, what the listed details tell you, and the trade-off of buying used.
A practical look at the MOXA EDS-316 industrial Ethernet switch, including its USD 549.94 price, the new-condition build, and the trade-off to weigh for fieldbus network projects.
The Phoenix Contact 1085255 FL SWITCH brings dependable Ethernet connectivity to industrial control networks, manufacturing plants, and process automation. Reviewing what it offers and who should consider it.
A practical look at the used Cisco IE-1000-8P2S-LM V03 8-port industrial Ethernet switch, covering what you get for USD 179.00, the reset caveats, and who it's best for.
A close look at the Invertek OPT-2-ETHEG-IN Ethernet IP Fieldbus Gateway, a new-in-box PLC Ethernet module priced at USD 152.98, to help you decide if it fits your industrial setup.
A close look at the used Cisco IE-3400-8P2S-A Rugged Series industrial Ethernet switch for industrial networking fieldbus environments, including its tested-working condition, missing power adapter, and USD 3,400.00 price.
A new-in-box Phoenix Contact 1085255 Industrial Ethernet Switch at USD 194.99, built for stable data transmission and resistance to vibration and electrical interference in factory automation and process control networks.
Between a new $27.99 industrial Ethernet switch and a used $249.99 fieldbus gateway, the right choice depends on whether you need simple port expansion or protocol translation. Here's how to decide.
The SEW DFP21B/UOH11B is a drive-focused PROFIBUS DP-V1 gateway, while the Moxa MGATE 4101-MB-PBS is a 1-port serial fieldbus gateway with a wider DC input range. Here's how to pick.
Phoenix Contact 1085255 vs PUSR USR-ISG/ISF: The automation-focused switch faces a plug-and-play gigabit option for industrial Ethernet. Choose based on control-system integration or simple deployment.
Compare the Datalogic FBC9080-N100 PROFINET gateway and the Moxa 4101-MB-PBS Modbus-to-Profibus gateway by listed price, condition, and port specs to choose the right fieldbus gateway for your network.
Need to pick between the Allen-Bradley 1756-EN2T communication module and the Cisco IE-3000-8TC managed switch for your industrial networking fieldbus? This head-to-head breaks down price, condition, and the right use case.
The open-box Moxa MGATE 4101-MB-PBS and the new Invertek OPT-2-ETHEG-IN both work as industrial networking fieldbus gateways, but their prices and conditions point to different projects. Decide based on serial connectivity needs, new versus open-box condition, and budget.
The Softing FG-100-PB covers a basic PROFIBUS-to-Ethernet bridge for $233.89, while the Moxa MGATE 4101-MB-PBS adds RS-232/422/485 and 12-48 VDC support for $969. Pick the one that matches your cabinet and budget.
Two used industrial networking fieldbus gateways - the Datalogic FBC9080-N100 at $99.99 and the Burkert 00307390 / ME43 at $249.99 - go head-to-head. See which fits your network.
Choose between the Softing FG-100-PB, a 1-channel PROFIBUS/Ethernet gateway at $233.89, and the Wenglor ZAG73AN02, an RS-232 to PROFIBUS DP gateway at $361.20. This head-to-head explains which one suits your existing network and where each wins.
Need a fieldbus gateway for serial-to-PROFIBUS communication? The Wenglor ZAG73AN02 offers a lower-cost RS-232 path, while the Moxa MGATE 4101-MB-PBS adds RS-422/485 and wider power input. Here's how to choose.
Comparing the Delta Tau ACC-72E and the Invertek OPT-2-ETHEG-IN for industrial networking fieldbus? The real decision is protocol match: CAN/PROFIBUS on one side, Ethernet IP on the other, with prices $404.99 vs $152.98.
Compare the Invertek OPT-2-ETHEG-IN Ethernet/IP gateway module at the low end of the price spread with the Wenglor ZAG73AN02 PROFIBUS DP gateway at the high end to see which industrial networking fieldbus module fits your controls project.
Two PROFIBUS DP gateways, one clear choice. Compare the WENGLOR ZAG73AN02's RS-232 connectivity with the SEW DFP21B/UOH11B's drive compatibility and price.
Need a fieldbus gateway? The Delta Tau ACC-72E card and Wenglor ZAG73AN02 both bridge industrial networking fieldbus, but they split on protocol, price, and condition. We compare which fits your line.
Choosing between the used SEW-Eurodrive DFP21B/UOH11B PROFIBUS gateway and the new Invertek OPT-2-ETHEG-IN Ethernet IP module? Here's how their prices, conditions, and network roles compare.
The Delta Tau ACC-72E and the Moxa MGATE 4101-MB-PBS are different ways to connect an industrial network. Compare price, condition, and form factor to decide between a $404.99 CAN/PROFIBUS card and a $969.00 1-port fieldbus gateway.
Choosing between the Delta Tau ACC-72E and the Moxa 4101-MB-PBS comes down to protocol, port needs, and condition tolerance. The Delta Tau offers a lower listed price and a CAN/PROFIBUS interface card; the Moxa is a 1-port Modbus-to-Profibus slave gateway at 230.4 Kbps for a higher price.
Two very different industrial networking fieldbus devices: an Ethernet switch and a fieldbus gateway. This head-to-head covers price, condition, and use case so you can pick the right one.
At $39.99 and $156.56, these two industrial Ethernet switches sit at opposite ends of the budget. The 10-port DIN-rail switch brings eight Gigabit ports plus two SFP slots; the Phoenix Contact FL SWITCH 1085255 brings a clear model number and a rugged automation pedigree. This head-to-head helps you decide which one fits your network, panel, and budget.
Compare the new MOXA EDS-316 and Phoenix Contact 1085255 FL SWITCH for industrial networking. See how a $156.56 switch stacks up against a $549.94 model and which fits your automation network.
The Cisco IE-3400 is a used Rugged Series switch with a working office background, while the Phoenix Contact FL SWITCH is a new-in-box industrial switch at a fraction of the price. This head-to-head helps you decide which fits your network and budget.
Choosing between a new MOXA EDS-316 Ethernet switch and a used Burkert ME43 fieldbus gateway? This comparison weighs the USD 549.94 and USD 249.99 options for your industrial networking fieldbus setup.
Choosing between the Softing FG-100-PB PROFIBUS/Ethernet gateway and the Invertek OPT-2-ETHEG-IN Ethernet/IP module comes down to protocol fit, condition, and price. Here's the quick verdict.
The MOXA EDS-316 and PUSR USR-ISG/ISF sit at opposite ends of the price spectrum. Compare their listed specs and price to see which industrial Ethernet switch is right for your fieldbus setup.
A used Burkert ME43 fieldbus gateway and a new industrial 6-port DIN-rail switch solve different jobs. Compare prices, roles, and trade-offs to pick the right industrial networking fieldbus component.
Need to expand a plant network or bridge a fieldbus device onto industrial Ethernet? This head-to-head weighs a 10-port DIN-rail switch against the Burkert ME43 gateway so you can match the right box to the job.
Deciding between a Phoenix Contact FL SWITCH 1085255 at $156.56 and an Industrial 6P DIN-Rail SFP switch at $29.99? See how they compare for your industrial networking fieldbus setup.
PUSR and N-TRON both make industrial Ethernet switches, but the $7 price gap hides real trade-offs. Compare an 8-port gigabit unmanaged switch with a used N-TRON built for PLC/HMI networks.
The $27.99 PUSR industrial Gigabit switch faces the $194.99 PHOENIX CONTACT 1085255. See which rugged network switch fits your automation project and budget.
Delta Tau ACC-72E vs Softing FG-100-PB: match CAN/PROFIBUS or PROFIBUS/Ethernet needs to choose the right industrial networking fieldbus gateway.
Choosing between a new Phoenix Contact 1085255 FL SWITCH and a used Cisco IE-3000-8TC comes down to condition versus price. Here's who should buy which for an industrial networking fieldbus.
Cisco IE-3400-8P2S-A and Burkert ME43 both serve industrial networking fieldbus roles, but one is a rugged Ethernet switch and the other is a fieldbus gateway. This guide compares their listed prices and use cases.
Compare the WENGLOR ZAG73AN02 and Moxa 4101-MB-PBS fieldbus gateways by protocol fit and listed price. Choose the Wenglor for RS-232 to PROFIBUS DP; choose the Moxa for Modbus-to-Profibus slave with 1-port, 230.4 Kbps.
Finding more guides for you…